Avaya IP Office H323 - Manual (Page 24)

H323 Phone Install Page 24
15-601046 Issue 15b (16 July 2009) IP Office 4.2
1.15 File Auto Generation
For IP Office 5.0+, for systems configure to use the IP Office control unit's memory card as the file server source, the IP
Office is able to auto-generate the necessary file if a specific file is not place on the card.
This operation is supported for the following files:
· 46xxupgrade.scr
This file will list the firmware files for 4600 Series and 5600 Series phones supported by the IP Office 5.0+
release. The last line will contain the filename 46xxsettings.txt.
· 16xxupgrade.txt
This file will list the the firmware files for 1600 Series series phones supported by the IP Office 5.0+ in release 5.
The last line will contain the filename 46xxsettings.txt.
· For both the files above, the appropriate .bin files must be manually copied to the memory card. The IP Office
5.0 Manager application provides a control for this (File | Upload Phone Files) through its embedded file
management option (File | Embedded File Management).
· The content of the files above System Locale dependant where different firmware files are required to support
certain language locales (for example Russia).
· 46xxsettings.txt
This file will match the file supplied with the IP Office 5.0+ Manager application except as follows:
· The BRIURI value will be set to indicate the IP Office memory card as
· The LANG1FILE to LANG4FILE values for 1600 Series phone non-English language files will be determined
from the best match to the system locale and the most common user locales. Languages supported are Dutch,
French, French (Canadian), German, Italian, Latin Spanish, Portuguese, Russian, Spanish.
· 1600 Series Language files
If the 46xxsettings.txt file is auto-generated, the matching 1600 Series phones specified in that file will also be
auto-generated.
· _16xxdata.txt
If the 46xxsettings.txt file is auto-generated, it will specify the IP Office memory card as the location for phones
to backup and restore user settings. If no file exists for a user, a file will be auto-generated.