American Power Conversion SUA48RMXLBP3U - Manual (Page 3)

SUA48RMXLBP3U External Battery Pack User Manual 3
Introduction
About this Unit
The SUA48RMXLBP3U connects to the APC Smart-UPS XL.Together these units provide extended
protection from utility power blackouts, brownouts, sags and surges from reaching your electronic equipment.
Unpack
Read the Safety Guide before installing the unit. The User Manual and Safety Guide are accessible on the
supplied User Manuals CD and on the APC Web site, www.apc.com.
Inspect the unit upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents:
Specifications
• External Battery Pack with two battery modules installed
• Bezel
• Rail kit
• External Battery Pack literature kit containing:
–
Two brackets
– Eight flathead screws
– Product documentation
– Smart-UPS® User Manuals CD
– Safety information
– Warranty information
The model and serial numbers
for all units are located on the
rear panel. See the small label
with numbers and bar codes.
Temperature
Operating
Storage
32 ° to 104 ° F (0 ° to 40 ° C)
5 ° to 113 ° F (-15 ° to 45 ° C) charge the battery module(s) every six
months
This unit is designed for indoor
use only. Select a location sturdy
enough to handle the weight.
Do not operate this unit where
there is excessive dust or the
temperature or humidity are
outside the specified limits.
Maximum
Elevation
Operating
Storage
10,000ft (3,000m)
50,000ft (15,240m)
Humidity 0 to 95% relative humidity, non-condensing
Weight 150 lbs (68 kg) with battery module
40 lbs (18 kg) without battery module
55 lbs (25 kg) each battery module 150 lbs (68 kg)
Maximum Number of External Battery Packs Supported by the
Smart-UPS XL
10