Atlantis Land A02-WAP-54G - Manual (Page 26)

ENGLISH
A02-WAP-54G 26
Configuring PC (Windows Vista)
1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-
click on Network and Sharing Center.
2. Click Manage network connections then double click on Local Area
Connection.
3. Click Continue (Windows needs your permission to continue).
4. Select Internet Protocol Version 4(TCP/IPv4) and click Properties
5. Select the Use the following IP address radio buttons (EG IP=192.168.1.2
and subnet Mask=255.255.255.0).
6. Click OK to finish the configuration
1.8 Browser configuration
Open the web browser, enter the local port IP address of this WirelessAccess
Point, which default at 192.168.1.1, and click Go to get the login page.
The default username is admin, password admin and click OK to continue. Click
on the desired item to expand the page with all settings in the main navigation
panel.
Following next steps you can make operating Wireless Multi-Function Access
Point in short time. Refer to manual on Installation CD if you need personalized
configuration.
Setup wizard is provided as the part of the web configuration utility. You can simply
follow the step-by-step process to get your wireless Access Point configuration
ready to run in 6 easy steps by clicking on the Wizard button on the function
menu.