Atlantis Land A02-WAP-54G - Manual (Page 22)

ENGLISH
A02-WAP-54G 22
1.3 The Rear Ports
PORT MEANING
Reverse SMA
There is one 2dBi Gain Antenna in the rear panel for
wireless connection.
Reset
After the device has turned on, press it to reset the
device or restore to factory default settings. Use a pin-
shape item to push to reset this device to factory default
settings. It will be useful too when the manager forgot the
password to login, but the setting will be back to default
setting.
LAN
Connect an UTP Ethernet cable to one of the four LAN
ports when connecting to a PC or an office/home network
of 10Mbps or 100Mbps.
POWER Jack
Connect the supplied power adapter to this jack.
1.4 Cabling
Connect to the xDSL/Cable Modem or Switch/Hub
Plug in one end of the RJ45 network cable to the xDSL/Cable Modem or
Switch/Hub Ethernet port.
Plug in the other end of the RJ45 network cable to the Wireless Access Point.
Check the installation