Atlantis Land A02-WAP-54G - Manual (Page 24)

ENGLISH
A02-WAP-54G 24
Please follow the steps below for PC’s network environment installation. First of all,
please check your PC’s network components. The TCP/IP protocol stack and
Ethernet network adapter must be installed. If not, please refer to MS Windows
relative manuals.
Before you configure this Wireless 108Mbps Access Point, you need to know the
following default settings:
•
Username:admin
• Password:admin
• IP LAN address: (192.168.1.1), Subnet Mask (255.255.255.0)
• DHCP Server: disable
• SSSID= default, Channel=6, WEP/WAP=disable
1.6 IE Configuration
Now open IE, go to Instruments menu, select the Connections tab and select one
of the following options:
• Never use remote connection
• Use remote connection if another network connection isn’t available
1.7 TCP/IP Configuration
Configuring PC (Windows 95/98/ME)
1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on
Network and choose the Configuration tab.
2. Select TCP / IP -> NIC Compatible, or the name of any Network Interface
Card (NIC) in your PC.
3. Click Properties.
4. Select the IP Address tab. In this page, click the Specify an IP address
radio button (EG IP=192.168.1.2 and subnet Mask=255.255.255.0).
5. Then select the DNS Configuration tab.
6. Select the Enable DNS radio button and click OK to finish the configuration.