LG XA64 User Manual
Page 7
7
Listening to CDs - More you can do
Pausing or restarting a CD
1 Press B[] on the unit or B/[] on the remote control during playback.
2 Press this button again to resume play.
Searching for a section within a track
Hold ./> on the unit or . bb / BB > on the remote control during
playback and release it at the point you want to listen to.
Skipping to another track (files)
Press ./> on the unit or . bb / BB > on the remote control.
Creating your own playlist
You can play up to 20 tracks on a CD in order.
1 Insert a CD and wait for it to be read.
2 Press PROGRAM/MEMO on the remote control in stop status.
3 Press ./> on the unit or . bb / BB > on the remote control to
select a track.
4 Press PROGRAM/MEMO again to save and select a next track.
Repeat the step 3 - 4.
5 Press B
B
/[] to play the programmed music files.
6 To clear your selection, press x
x STOP (or x
x ) twice.
Listening to your tracks (files) repeatedly or randomly
1 Press REPEAT/RANDOM on the remote control repeatedly.
Tracks will be played back repeatedly or randomly.
2 To return to normal playback, press it repeatedly to select [OFF].
About MP3/ WMA
MP3/ WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency : 32 - 48 kHz (MP3), 32 - 48 kHz (WMA)
• Bit rate : 32 - 320 kbps (MP3), 40 - 320 kbps (WMA)
• CD-R physical format should be “ISO 9660/ JOLIET”
• If you record MP3/WMA files using the software which cannot create a
FILE SYSTEM, for example “Direct-CD” etc., it is impossible to playback
MP3 files.
We recommend that you use “Easy-CD Creator”, which creates an ISO
9660 file system.
• Do not use special letters such as “/ : * ? “ < >”etc.
• At most 99 folders and 999 files are supported on the unit.
Listening to CDs
Audio CD and MP3/ WMA CD can be played back in this unit.
1. Open the CD tray
2. Insert the CD: Label facing up.
3. Close the CD tray
4. Select the CD function
5. Start the CD playing
6. To stop a CD playing
Z
Z OPEN/CLOSE
-
Z
Z OPEN/CLOSE
FUNC.
B
B[]
x
x STOP
-
-
-
FUNCTION
B
B
/[]
x
x
ON UNIT
ON REMOTE
Listening to music from your portable player
The unit can be used to play the music from many types of portable
player.
1. Connect the portable player to
the PORT. IN connector of the
unit.
2. Turn the power on.
3. Select the PORTABLE function.
4. Turn on the portable player and
start it playing.
-
1
1/
/]]
FUNC.
-
-
POWER
FUNCTION
-
ON UNIT
ON REMOTE
PORT. IN
XA64-D0U-AHUNLL-ENG 11/13/09 2:07 PM Page 7