Adjust the settings, Adjust the settings - more you can do – LG DP450P User Manual

Page 8

Adjust the settings

BUTTON

Display setup menu:

SETUP

Select a desired option on the first level:

v V

Move to second level:

Select a desired option on the second level:

v V

Move to third level:

Change the setting:

v V

/ ENTER

Adjust the settings - more you can do

When you turn on for the first time (optional)

The menu for a language selection will appear when you turn on the unit for the
first time. You must select a language to use the unit. Use

vV b B to select

a language then press ENTER and the confirm menu will appear. Use

b B to

select [ENTER] then press ENTER.

Adjust the language settings

Menu Language –

Select a language for the Setup menu and on-screen dis-

play.

Disc Audio/Subtitle/Menu –

Select a language for the Disc Audio/Subtitle/

Menu.

[Original]: Refers to the original language in which the disc was recorded.

[Other]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list.
(see page 13) If you make a mistake while entering number, press CLEAR to
delete numbers then correct it.
[Off] (for Disc Subtitle): Turn off Subtitle.

Adjust the display settings

TV Aspect –

Select which screen aspect to use based on the shape of your TV

screen.

[4:3]: Select when a standard 4:3 TV is connected.

[16:9]: Select when a 16:9 wide TV is connected.

Display Mode –

If you selected 4:3, youʼll need to define how you would like

widescreen programs and films to be displayed on your TV screen.

[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.

[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.

Adjust the audio settings

DRC (Dynamic Range Control) –

Make the sound clear when the volume is

turned down (Dolby Digital only). Set to [On] for this effect.

Vocal –

Set to [On] only when a multi-channel karaoke DVD is playing. The

karaoke channels on the disc mix into normal stereo sound.

Adjust the lock settings

You must set the [Area Code] option to use the lock options. Select [Area Code]
option then press

B. Enter a 4-digit password then press ENTER. Enter it again

then press ENTER to verify. If you make a mistake while entering number, press
CLEAR

then correct it.

If you forget your password you can reset it. First, remove the disc in the unit.
Display setup menu then input the 6-digit number “210499” and the password
will be cleared.

Rating –

Select a rating level. The lower the level, the stricter the rating. Select

[Unlock] to deactivate the rating.

Password

– Sets or changes the password for lock settings.

[New]: Enter a new 4-digits password using the numerical buttons then press
ENTER

. Enter the password again to confirm.

[Change]: Enter the new password twice after entering the current password.

Area Code

– Select a code for a geographic area as the playback rating level.

This determ ines which areaʼs standards are used to rate DVDs controlled by the
parental lock. (See page 13)

DP450-P.ACZELLP_ENG_MFL61857018.8 8

2/23/09 2:51:24 PM

This manual is related to the following products:

DP450 DP450R