beautypg.com

Power connections – LG DP450P User Manual

Page 6

background image

6

Power connections

Connecting the AC Adapter

Connect the supplied AC Adapter from the unit to a power socket.

AC adapter

• This AC adapter operates on 100-240V~ 1 A 50/60Hz.
• Contact an electrical parts distributor for assistance in selecting a suitable

AC plug adapter or AC cord set.

• Manufactured by NANJING WANLIDA TECHNOLOGY CO., LTD

Connect the Automotive adapter

This unit and its automotive adapter are designed for use in vehicles that have
8.5-16 volt, negative ground electrical systems. This is standard for most vehi-
cles. If your vehicle has a different type of the electrical system, the DC power
system cannot be used.

Automotive adapter

• This automotive adapter operates on DC 8.5-16V.
• Contact an electrical parts distributor for assistance in selecting a suitable

automotive adapter.

• Manufactured by NANJING WANLIDA TECHNOLOGY CO., LTD.

Caution

• To prevent electrical shock and possible damage to your unit or vehicle,

always unplug the automotive adapter from the cigarette lighter socket
before you remove the plug from your unit.

• A 3 amp. 250V fuse for protection is installed in the automotive adapter.
• While the engine is being started, disconnect the automotive adapter from

the carʼs cigarette lighter socket.

• Do not operate your unit when the car battery is discharged.

Peak current from the car generator may cause the DC fuse to blow.

• If the vehicleʼs supply voltage drops below approximately 10 volts, your unit

may not work properly.

• Do not leave your unit in a place where the temperature exceeds 70°C

(158°F), or the pick-up device may be damaged.
Examples include:
- Inside a car with the windows closed and in direct sunshine.
- Near a heating appliance.

6

Plug into the

“DC 12V IN” jack.

Plug into the carʼs

cigarette lighter

socket.

Right side of the unit

Plug into a
power source.

Right side of the unit

Power cord

release knob

Attach the power plug to the body of the AC adapter.
(The actual set may differ from the drawing.)

Plug into the “DC 12V IN” jack.

DP450-P.ACZELLP_ENG_MFL61857018.6 6

DP450-P.ACZELLP_ENG_MFL61857018.6 6

2/23/09 2:51:23 PM

2/23/09 2:51:23 PM

This manual is related to the following products: