ATEN CE-300 - Manual (Page 13)

1. Introduction
5
Components
CE-300L (Local Unit) Front View
No. Component Description
1 KVM Port Section This section is made up of a microphone jack, speaker
jack and KVM (keyboard, video, mouse), data connector.
The cable that links the CE-300L to your local KVM
console plugs in here. Only KVM cables designed to work
with this switch can plug in (see Cables, page 3, for
details).
2 LEDs The Local Unit has two LEDs to indicate the operating
status of the Local and Remote units (see page 11 for
details).
3 Firmware Upgrade
Port The Firmware Upgrade Cable that transfers the firmware
upgrade data from the administrator's computer to the CE-
300L plugs into this connector.
4 Operating Mode
Selection Switch Pressing this switch cycles through the operating mode
choices:
Š
Auto: Both consoles can control the system(s);
Š
Local: Only the local console can control the system(s);
Š
Remote: Only the remote console can control the
system(s).
1 2
3 4