American Dryer Corp. Gas- DSI/Steam ML-82 II - Manual (Page 10)

6
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
* Size piping to dryers varies with installation conditions.
** Steam dryers must be provided with a clean, dry, and regulated 80 PSI +/- 10 PSI (5.51 bars +/- 0.68 bars) air supply.
IMPORTANT: Steam dryers must be provided with a clean, dry, and regulated 80 PSI +/- 10 PSI
(5.51 bars +/- 0.68 bars) air supply.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
BASKET (TUMBLER) DIAMETER 37” 94 cm
BASKET (TUMBLER) DEPTH 36” 91.5 cm
BASKET (TUMBLER) MOTOR 1/2 HP 0.373 kw
BLOWER MOTOR 3 HP 2.2 kw
DOOR OPENING (DIAMETER) 31-3/8” 79.7 cm
BASKET (TUMBLER) VOLUME 22.4 cu. ft. 0.634 cu.m.
DRYERS PER 20'/40' CONTAINER 10/20
DRYERS PER 45'/48' TRUCK 24/24
VOLTAGE AVAILABLE 208-460v 3ø 50/60 Hz
APPROX. NET WEIGHT 833 lbs. 377.8 kg
APPROX. SHIPPING WEIGHT 883 lbs. 400.5 kg
HEAT INPUT 270,000 btu/hr 68,040 kcal/hr
AIRFLOW 1,700 cfm 48.14 cmm
INLET PIPE CONNECTION* 1” F.P.T.
VOLTAGE AVAILABLE 208-460v 3ø 50/60 Hz
APPROX. NET WEIGHT 864 lbs. 392.7 kg
APPROX. SHIPPING WEIGHT 914 lbs. 415.5 kg
AIRFLOW 1,700 cfm 48.14 cmm
COMPRESSED AIR VOLUME 0.75 cfh 0.02 cmh
COMPRESSED AIR CONNECTION 1/8” F.P.T.
STEAM CONSUMPTION
BOILER HP
NORMAL LOAD
375 lbs/hr 170.5 kg/hr 11
OPERATING STEAM PRESSURE
SUPPLY
CONNECTION*
RETURN
CONNECTION*
125 PSI max 8.6 bars 1” F.P.T. 1” F.P.T.
Shaded areas are stated in metric equivalents
Gas
Steam**