Daily use, 2 heat setting displays, 3 residual heat indicator – Electrolux EHF3320FOK User Manual
Page 21: 1 activation and deactivation, 2 automatic switch off, 3 the heat setting, 4 activation and deactivation of the outer ring

3.2 Heat setting displays
Display
Description
The cooking zone is deactivated.
-
-
The cooking zone operates.
The
function operates.
The Automatic Heat Up function operates.
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / The Child Safety Device operates.
The Automatic Switch Off operates.
3.3 Residual heat indicator
WARNING!
The risk of burns from residual
heat!
4. DAILY USE
WARNING!
Refer to the Safety chapters.
4.1 Activation and deactivation
Touch
for 1 second to activate or de-
activate the appliance.
4.2 Automatic Switch Off
The function deactivates the
appliance automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sound some time and
the appliance deactivates. Remove the
object or clean the control panel.
• You do not deactivate a cooking zone
or change the heat setting. After some
time
comes on and the appliance
deactivates. See below.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
•
,
-
— 6 hours
•
-
— 5 hours
•
— 4 hours
•
-
— 1.5 hours
4.3 The heat setting
Touch
to increase the heat setting.
Touch
to decrease the heat setting.
The display shows the heat setting. Touch
and
at the same time to deactivate
the cooking zone.
4.4 Activation and deactivation
of the outer ring
You can adjust the surface you cook to
the dimension of the cookware.
To activate the outer ring touch the sen-
sor field
. The indicator comes on.
Do the procedure again to deactivate the
outer ring. The indicator goes out.
ENGLISH
21