beautypg.com

1 replacing the bulb – Electrolux EC3340AOW User Manual

Page 31

background image

Problem

Possible cause

Solution

Large quantities of food to
be frozen were put in at
the same time

Wait some hours and then
check the temperature
again. Next time insert
smaller quantities of food to
be frozen at any one time.

Food placed in the appli-
ance was too warm

Allow food to cool to room
temperature before storing.

Products to be frozen are
placed too closely to each
other

Place the products in a way
so that cold air could circu-
late among them

It is too cold inside
the freezer

The temperature is not set
correctly

Set a warmer temperature

The appliance does
not work at all.

Plug is not connected to
the mains socket properly

Connect the mains plug
properly

Power does not reach the
appliance

Try connecting another
electrical device to the
power outlet

The appliance is not
switched on

Switch on the appliance

There is no voltage in the
mains socket (try to con-
nect another appliance in-
to it)

Call an electrician

8.1 Replacing the bulb

If it becomes necessary to replace the
lamp:

• break the circuit of the appliance
• remove the lamp cover with a screw-

driver as shown in the graphic

• replace the bulb with one of the same

power and specifically designed for
household appliances. (the maximum
power is shown on the light diffuser)

• replace the lamp cover and reconnect

the appliance

WARNING!
Do not operate the freezer if the
lamp cover is damaged or miss-
ing.

ENGLISH

31