Electrolux EN3450COW - Manual (Page 27)

2. Engage the spacer below the screw.
3. Turn the spacer to the right position.
4. Tighten again the screws.
2
4
3
1
8.5 Levelling
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
8.6 Door reversibility
WARNING!
Before carrying out any opera-
tions, remove the plug from the
power socket.
To carry out the following opera-
tions, we suggest that this be
made with another person that will
keep a firm hold on the doors of
the appliance during the opera-
tions.
To change the opening direction of the
door, do these steps:
• Open the doors. Unscrew the middle
hinge (B). Remove the plastic spacer (A)
• Remove the spacer (F) and move to the
other side of the hinge pivot (E).
• Remove the doors.
• Remove the left-hand cover pin of the
middle hinge (C, D) and move to the
other side.
• Fit the pin of the middle hinge (E) into
the left-hand hole of the lower door.
E F
A
B
D C
• Unscrew the upper hinge pivot and
screw it on the opposite side.
• Remove the cover with the help of a
tool. (A).
• Unscrew the lower hinge pivot (B) and
the spacer (C) and place them on the
opposite side.
• Re-insert the cover (A) on the opposite
side.
A
C
B
• Remove the covers (B). Remove the
cover pins (A).
• Unscrew the handles (C) and fix them
on the opposite side . Place the lower
ENGLISH 27