Safety clearances, Preparing the units, Notes – Bosch HUI54451UC User Manual

Page 9: Ing the units

Safety clearances

The clearance between the shelf on the cooktop and the

bottom of the extractor hood may not be less than 24"

(610 mm) in the case of electric cooktops and 25

(650 mm) in case of gas or combined ranges.
If the installation instructions for the gas cooking

appliance specify a larger distance, this must be taken

into account.

Preparing the units

Fitted units must be heat-resistant up to 90 °C. The

stability of the fitted unit must also be guaranteed after

the cut-out work.
Make the cut-out according to the installation sketch.
After the cutting out work is complete, remove the

shavings.

Notes

▯

Heed the clearance between the partition floor and the

lower edge of the fitted unit; see drawing.

▯

Use the included template to make the holes and the

cut-outs.