beautypg.com

Troubleshooting, Emergency door lock release, 9 warning – Bosch WAP24201UC User Manual

Page 29: Risk of scalding, Risk of injury, 9 caution, Water damage, Allow the water in the drum to cool off, Loosen screws and remove the protective foil, The washing machine door can then be opened

background image

29

Troubleshooting

Emergency door lock release

In the event of a power interruption the program will

continue running when the power supply has been

restored.
If the washer door must be opened and the normal door

unlock procedures do not work, the emergency door

lock release rod can be actuated to open the door.

9

WARNING

RISK OF SCALDING
To avoid risk of scalding, allow water to cool down

prior to activating the emergency door lock release.

The drum may be full of hot water which could

cause burn injury,

9

WARNING

RISK OF INJURY
You may injure your hands if you reach into the

drum while it is turning.
Do not reach into the drum when it is turning. Wait

until the drum has stopped turning.

9

CAUTION

WATER DAMAGE
Any escaping water may cause water damage.
Do not open the washing machine door if water can

be seen through the glass.

1.

Turn the washer off by rotating the cycle selector to the

Off position. Any running program will then be

cancelled. Disconnect the mains plug.

2.

Allow the water in the drum to cool off.

3.

Allow the washer drum to come to a stand still (no

longer spinning).

4.

Before opening the washer door, perform the drain

procedure included in the pump maintenance section

following.
~ Cleaning the drain pump; Page 27

5.

Loosen screws and remove the protective foil.

6.

The washing machine door can then be opened.
Pull the emergency release downwards with a tool and

release.

7.

The door can then be opened.

Troubleshooting

If you encounter a problem, consider the suggestions

and instructions below before you call customer service.

9

WARNING

ELECTRIC SHOCK
To avoid risk of electric shock, repairs should be

carried out by an authorized technician.

If repairs are necessary and you cannot eliminate the

fault with the aid of the table below, follow these steps:

1.

Turn the cycle selector to Off.

2.

Disconnect the washer from the power outlet.

3.

Turn off the water faucet.

4.

Call Customer Service.
~ Customer service; Page 4

NOTICE: The troubleshooting items listed below can

help you resolve minor issues with your washer quickly

and without the necessity of waiting for a service call.
Service calls for issues that could have been solved by

using this table may not be covered under the

warranty. Please rule out any of these issues before

calling customer service.