ADC FPL Series - Manual (Page 16)

ADCP-90-328 • Issue 2 • November 2005
Page 16
© 2005, ADC Telecommunications, Inc.
Figure 15. Connector Numbers on Rear of 72 Position Bulkhead
4. Route the pigtails within the panel as shown in Figure 16 (12/24 position 1RU panel),
Figure 17 (24 position 3RU panel), Figure 18 (48/72/96 position panel), or Figure 19 (144
position panel).
5. Continue installing the pigtails in groups of 12 until all of the pigtails are labeled,
connected, and routed to the splice area.
Figure 16. Pigtail Routing (12/24 Position 1RU Panel)
17825-A
TOP VIEW
(SHOWN WITH TOP OF CHASSIS REMOVED)
OSP CABLE
CLAMP
20961-A