ATEN ALTUSEN KH1516 - Manual (Page 70)

KH1508 / KH1516 User Manual
56
Administrator Login Failure
If you are unable to perform an Administrator login (because the Username and
Password information has become corrupted or you have forgotten it, for
example) you can clear the login information with the following procedure:
1. Power off the KH1508 / KH1516 and remove its housing.
2. Short the jumper labeled J8.
3. Power on the switch.
The on screen display will show a message informing you that the
password information has been cleared.
4. Power off the switch.
5. Remove the jumper cap from J8.
6. Close the housing and start the KH1508 / KH1516 back up.
After you start back up, you can use the default Username and Password
(see Overview, page 21) to log in.
kh15816-v1.book Page 56 Wednesday, October 25, 2006 11:05 AM