ATEN ALTUSEN KH1516 - Manual (Page 46)

KH1508 / KH1516 User Manual
32
F5 SKP
Pressing [F5] invokes Skip (SKP) Mode. This function enables you to easily
skip backward or forward - switching the console focus from the currently
active computer port to the previous or next available one.
Š The selection of computers to be available for Skip Mode switching is
made with the Scan/Skip Mode setting under the F3 SET function (see
page 26).
Š When you are in Skip Mode, press [ ← ] to switch to the previous
computer in the List; press [
→ ] to switch to the next computer in the List;
press [
↑ ] to switch to the last computer on the previous station in the List;
press [
↓ ] to switch to the first computer on the next station in the List.
Note: When you Skip, you only Skip to the previous or next available
computer that is in the Scan/Skip Mode selection (see page 27).
Š If a Port has been selected for Scan/Skip Mode, when the focus switches to
that port a Left/Right Triangle symbol appears before its Port ID Display
to indicate so.
Š While Skip Mode is in effect, the console will not function normally. You
must exit Skip Mode in order to regain control of the console.
Š To exit Skip Mode, press [Spacebar] or [Esc].
kh15816-v1.book Page 32 Wednesday, October 25, 2006 11:05 AM