Electrolux ZCS2100 - Manual (Page 12)

14
English
TROUBLESHOOTING AND CONSUMER INFORMATION
Troubleshooting
The vacuum cleaner does not start
1
Check that the cable is connected to the mains.
2 Check that the plug and cable are not damaged.
3 Check for a blown fuse.
The vacuum cleaner stops
1
Check whether the dust bag, s-bag™ is full. If so, replace
it with a new one.
2 Is the nozzle, tube or hose blocked?
3 Are the filters blocked?
Water has entered the vacuum cleaner
It will be necessary to replace the motor at an authorised
Electrolux service centre.
Damage to the motor caused by the penetration of water is not
covered by the warranty.
Consumer information
Electrolux decline all responsibility for all damages arising from
any improper use of the appliance or in cases of tampering with
the appliance.
This product is designed with the environment in mind. All plas-
tic parts are marked for recycling purposes. For details see our
web site: www.electrolux.com
If you have any comments on the cleaner or the Instructions for
Use booklet please e-mail us at: [email protected]
Electrolux decline all responsibility for all damages arising from
any improper use of the appliance or in cases of tampering with
the appliance.
This product is designed with the environment in mind. All plas-
tic parts are marked for recycling purposes. For details see our
web site: www.electrolux.com
If you have any comments on the cleaner or the Instructions for
Use booklet please e-mail us at: [email protected]
If you can´t find dustbags or accessories to your Electrolux vacuum
cleaner, please visit our website at www.electrolux.co.uk or call
08706 055 055.