Electrolux EN3881AOX - Manual (Page 21)

contact for this purpose. If the domestic
power supply socket is not earthed, con-
nect the appliance to a separate earth in
compliance with current regulations, con-
sulting a qualified electrician. The manufacturer declines all responsibili-
ty if the above safety precautions are not
observed.
This appliance complies with the E.E.C.
Directives.
8.6 Door reversibility
2
1
WARNING!
Before carrying out any opera-
tions, remove the plug from the
power socket.
WARNING!
Make sure that the appliance is
electrically not powered.
To carry out the following opera-
tions, we suggest that this be
made with another person that will
keep a firm hold on the doors of
the appliance during the opera-
tions.
• Remove the upper hinge cover with a
screwdriver.
• Open the door and remove the door
end cap cover.
• Remove the top front covers on both
sides. (1)
• Unplug the cable connector of the dis-
play. (2)
• Unscrew the hinges and remove the
door.
E F
A
B
D C
• Remove the plugs of the middle cross-
beam.
• Remove the cover wit the help of a tool.
(A).
• Unscrew the lower hinge pivot (B) and
the spacer (C) and place them on the
opposite side.
• Re-insert the cover (A) on the opposite
side.
• Place the door on the lower hinge.
ENGLISH 21