Avanti IHP1500 - Manual (Page 12)

12
• Hotplate overheating protection: The hotplate is designed with a built-in fan that adjusts the
temperature inside the hotplate. If the air inlet or outlet should be blocked and or clogged, the
hotplate will automatically shut off after 10 audio alarms advising the consumer of the error.
To correct this situation, clear the air inlet and outlet and restart the hotplate once it has
cooled down for 5 minutes.
• Cooktop safety protection: If the cookware is removed during the cooking process, an error
message “E8 ” will appear in the display and an audio alarm will sound and then shut off
automatically. If after 6 seconds an appropriate cookware utensil has not been placed on the
hotplate, it will shut off automatically and begin its 5 minute cool down procedure.
• Automatic cool down process: After each use and or the temperature meets maximum range
the unit will go into an “Automatic cool down process” for 5 minutes in which the internal fan
will cool the unit down to prevent overheating and extend the life of the unit.
¾ COOKWARE TIPS
The physical characteristics of pots and pans influence the performance of any cooking systems.
Therefore, emphasis must be placed on the importance of using proper cookware.
• Cookware made of high-grade steel 18/10, aluminum, glass, and or copper cannot be used with
any type of induction cooking device.
• Only use cookware with a magnetic bottom. (Magnet must remain sticking to the bottom to ensure
an accurate heat transfer between the induction hotplate and your cookware).
• Use cooking vessels with flat bottoms and tight fitting lids to conserve energy and shorten cooking
times.
• Pan size should match the element size. A slightly larger pan covers the entire element and
prevents spillovers from contacting the heat surface and burning in. Using a smaller pan than the
element is a waste of energy.
• To avoid spattering and to maximize efficiency, pan bottoms should be clean and dry before
coming in contact with the elements.
• Wipe spills off the element with a damp cloth as soon as it cools to cut down on clean up time. Be
sure the control is .
To prevent damage use correct cookware, start cooking on the highest temperature and turn control
down to continue cooking.
Never leave an empty utensil, or one which has boiled dry, on a hot surface unit. The utensil could
overheat and damage the utensils or surface unit.
Always be sure that all control knobs are turned to
and the indicator lights are when you are
not cooking.
CARE AND MAINTENANCE
¾ GENERAL INFORMATION
• CAUTION: Before any operation of cleaning and maintenance disconnect the appliance
from the electrical supply.
• It is advisable to clean when the appliance is cold and especially for cleaning the enameled parts.
• Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc.) on the surfaces.
• Avoid using cleaning products with a chlorine or acidic base.