Electrolux EI23BC60KS - Manual (Page 32)

32 Common Solutions for Concerns
Temperatures Are Too Cold
Concern Potential Cause Common Solution
Freezer temperature
too cold. Refrigerator
temperature is
satisfactory.
• Fast Freeze function is activated.
• Freezer control is set too cold.
• Ice maker is on.
• Fast Ice function is activated.
• Deactivate Fast Freeze function.
• Set freezer control to a warmer setting. Allow 24 hours
for temperature to stabilize.
• It is normal for the freezer compartment to over cool
while automatic ice maker is on.
• Deactivate Fast Ice function.
Refrigerator temperature
too cold. Freezer
temperature is
satisfactory.
• Refrigerator control is set too cold. • Set refrigerator control to a warmer setting. Allow 24
hours for temperature to stabilize.
Food stored in drawers
freezes.
• Refrigerator control is set too cold. • See solution above.
Food stored in Meat
Keeper freezes (select
models).
• Meat Keeper temperature control is set too
cold.
• Adjust Meat Keeper temperature control to a warmer
setting. Meat should be stored at a temperature just
below the freezing point for maximum fresh storage
time. It is normal for ice crystals to form due to the
moisture content of meat.
Temperatures Are Too Warm
Concern Potential Cause Common Solution
Freezer/Refrigerator
temperature is too
warm.
• Doors are opened too frequently or too long.
• Door is slightly open.
• Warm air enters the refrigerator whenever the door is
opened. Open the door less often.
• See Problem section, Opening/Closing of Doors/
Drawers.
Freezer temperature is
too warm. Refrigerator
temperature is
satisfactory.
• Freezer control is set too warm. • Set freezer control to a colder setting. Allow 24 hours
for temperature to stabilize.
Refrigerator temperature
is too warm. Freezer
temperature is
satisfactory.
• Refrigerator control is set too warm. • Set refrigerator control to a colder setting. Allow 24
hours for temperature to stabilize.
Temperature in the
Cool Zone TM or Perfect
Temp TM Drawer is too
warm (select models).
• Temperature control is set too warm. • Adjust temperature control to a colder setting.