Cop y, Using the battery pack – Canon SELPHY CP800 Black User Manual
Page 30
1
2
3
Installing the Battery
Charging the Battery
Using the Battery Pack
Use the battery pack NB-CP2L (sold separately) for printing images in places without a power outlet.
With a fully charged battery, you can print approximately 36 sheets* of Postcard size paper.
* The number of possible prints is based on Canon testing standards, and may change depending on printing
conditions.
Remove the battery terminal cover.
Plug in SELPHY
(p. 10)
.
Charging starts and
appears on the screen.
Charging completes after approximately 4 hours. and
disappears.
If you press the q button while the battery is charging
(p.
11)
, SELPHY can be used; however, charging will stop.
When you turn SELPHY off
(p. 11)
,
appears and
charging resumes.
For cautions concerning the battery, refer to the user guide included with the battery.
When
is displayed and you press any button other than the q button for 3 seconds or
longer,
will disappear. When the screen is turned off while the battery is charging and you
press any button other than the q button,
will appear after approximately 10 seconds.
If SELPHY is not used for more than five minutes, it will automatically turn off to save power.
If a red
appears, the battery has reached the end of its life span. Purchase a new battery.
Remove the battery cover.
Slide and hold the cover lock (
), then remove the cover
towards (
).
Attach the battery.
Insert the tab (
), then push the battery (
) until it clicks
and locks into place.
Air Vents
COP
Y