Canon imageFORMULA DR-C125 Document Scanner - Manual (Page 47)

47
2
Enter the job name, and press the Enter key.
3
Specify the output method of the job. (See p. 42)
Hint
You can assign the job to the Start button by selecting [Start
button] for [Button assignment]. (See p. 49)
4
Click [Output setting], and configure the output settings.
The output setting items differ depending on the specified output
method. For details on the setting items, see the Help of
CaptureOnTouch.
Selecting a Job and Scanning
1
Place the document in the scanner. (See p. 27)
The top screen of Select Scan Job appears.
2
Click a job.
0-00-DR-C125_RG_UK.book Page 47 Thursday, September 8, 2011 6:03 PM