Canon Wireless Transmitter WFT-E6A - Manual (Page 71)

71
Using the Transmitter with WFT Server
1 Set up the slave cameras.
Set up the slave cameras as described on page 66.
2 Set up the master camera.
Complete settings on the master camera following
steps 1–3 on page 66, and then select [Master].
3 Select [Manual connect].
4 Select the connection mode.
Select the wireless LAN ad hoc mode supported
by the computer.
5 Specify the channel.
When selecting [Manual setting], specify the
same channel on the master camera, slave
cameras, and computer.
Connect the Master and Slave Cameras
COP
Y