Cop y, Depth-of-field scale, Infrared index – Canon TS-E 24mm f3.5L II User Manual
Page 16
ENG-15
The depth of field is the distance in front of and
behind the plane of focus on the subject that
appears sharp. The depth of field is indicated by
the area between the depth-of-field scale lines
below the distance scale.
The infrared index corrects the focus setting
when using monochrome infrared film. Focus on
the subject in MF, then adjust the distance
setting by moving the focusing ring to the
corresponding infrared index mark.
6. Depth-of-Field Scale
(TS-E24mm f/3.5L II)
7. Infrared Index
(TS-E24mm f/3.5L II)
●
The depth-of-field scale is only valid when the
tilt scale is set to the “0” position.
●
The depth-of-field scale is an approximate
indicator.
●
The infrared index position is based on a
wavelength of 800 nm.
●
Be sure to observe the manufacturer’s
instructions when using infrared film.
●
Use a red filter also when you take the picture.
Some EOS cameras cannot use infrared film. See
the instructions for your EOS camera.
22
22
11
11
4
3
m
f t
1
3
2
5
0.5
1.5
0.7
4
22
22
11
11
4
3
m
f t
1
3
2
5
0.5
4
1.5
0.7
4
02-7587_ENG 10.2.10 3:48 PM Page 15
COP
Y