Allied Air Enterprises 92G1DF - Manual (Page 17)

506503-01 Page 17 of 44
Issue 1031
TYPICAL EXHAUST PIPE CONNECTIONS AND CONDENSATE TRAP INSTALLATION
Figure 21
DO NOT transition from smaller
to larger pipe size in horizontal
runs of exhaust pipe.
Use only the
factory supplied trap.
Trap can be installed
on either side of
cabinet within 5 ft. of
the furnace.
Pipe size determined in Table 7.
Figure 22
TYPICAL INTAKE PIPE CONNECTIONS AND CONDENSATE TRAP INSTALLATION
Use only the
factory supplied trap.
Trap can be installed
on either side of
cabinet within 5 ft. of
the furnace.
Pipe size determined in Table 7.