Answering system settings, Or p, Elect . 3. press q – AT&T CL83101 User Manual
Page 78: Elect . 4. press q, Delete to backspace and delete a digit. 6. press
Answering system
72
Answering system settings
Remote access code
To access your answering system remotely from any touch-tone phone, you
need to enter a 2-digit number (00-99). By default, the remote access code
is
19.
To change the remote access code:
Using a cordless handset:
1. When the handset is in idle mode, press
MENU/
�ELECT
to
enter the main menu.
2. Press q
CID
or p
DIR
to scroll to
>Answering sys, then
press
MENU
/�ELECT.
3. Press q
CID
or p
DIR
to scroll to
>Ans sys setup, then
press
MENU
/�ELECT.
4. Press q
CID
or p
DIR
to scroll to
>Remote code, then press
MENU
/�ELECT.
5. Use the dialing keys to enter a
2-digit number. Press
MUTE
/DELETE to backspace and delete a digit.
6. Press
MENU
/�ELECT to save the setting. You hear a
confirmation tone.
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU/
�ELECT
to enter the main menu.
2. Press q
CID
or p
DIR
to scroll to
>Answering sys, then
press
MENU
/�ELECT.
3. Press q
CID
or p
DIR
to scroll to
>Ans sys setup, then
press
MENU
/�ELECT.
4. Press q
CID
or p
DIR
to scroll to
>Remote code, then
press
MENU
/�ELECT.
5. Use the dialing keys to enter a
2-digit number. Press
X/DELETE to backspace and delete a digit.
6. Press
MENU
/�ELECT to save the setting. You hear a
confirmation tone.
Play messages
>Answering sys
p
q
Answer ON/OFF
>Ans sys setup
p
q
REMOTE CODE
19
Play messages
>Answering sys
p
q
Answer ON/OFF
>Ans sys setup
p
q
REMOTE CODE
19