AT&T CL83101 - Manual (Page 51)

Multiple handset use
45
Push-to-talk (PTT)
�TT call to multiple devices
When there are multiple handsets registered to the phone system, PTT
supports one-to-group calls. PTT supports a maximum of one-to-five calls
when one to five handsets are registered, and a maximum of one-to-four
calls when six or more handsets are registered. The first four registered
handsets will be able to use this feature. Other handsets can only use PTT for
one-to-one calls.
To call multiple devices:
Using a cordless handset:
1. You have three ways to call multiple devices. When the handset is not in use:
Press and hold �U�H TO TAL� until the handset shows
Connecting to group...
Press
�U�H TO TAL�. Press q
CID
or p
DIR
to choose Group. Press
MENU
/�ELECT or press �U�H TO TAL� then your handset shows
Connecting to group...
Press
�U�H TO TAL�. Press TONE and # (pound key). The handset
shows Connecting to group...
When the connection is made, both the caller and the destination parties
hear a beep. The speakerphones on all other devices automatically activate.
2. You need to press and hold �U�H TO TAL� when you want to speak.
Speak towards the handset. Your voice is broadcast to all devices.
3. Release �U�H TO TAL� after speaking.
4. Any extension can reply (see Answer a �TT call on page 46).
Using the telephone base:
1. You have three ways to call multiple handsets. When the telehone base is
not in use:
Press and hold �TT until the screen shows Connecting to group...
Press �TT. Press q
CID
or p
DIR
to choose Group. Press
MENU
/�ELECT or
press �TT then the telephone base shows Connecting to group...
Press �TT. Press TONE and # (pound key). The screen shows
Connecting to group...
When the connection is made, both the caller and the destination parties
hear a beep. The speakerphones on all other devices automatically activate.
2. You need to press and hold �TT when you want to speak. Speak towards
the telephone base. Your voice is broadcast to all devices.
3. Release �TT after speaking.
4. Any extension can reply (see Answer a �TT call on page 46).
NOTE: After �U�H TO TAL� on the handset or �TT on the telephone base is released, the PTT
call remains open for a short time. If no one presses �U�H TO TAL� on the handset or �TT on
the telephone base within 10 seconds, the PTT call ends automatically.
•
•
•
•
•
•