AT&T CL83101 - Manual (Page 18)

Telephone settings
12
Handset settings
Ringer volume
You can set the ringer volume level to one of six levels or
turn the ringer off. When the ringer is off,
appears on the
screen.
1. Press MENU/ �ELECT i n idle mode to enter the main menu.
2. Use q
CID
or p
DIR
to scroll to >Ringers, then press
MENU /�ELECT.
3. Press
MENU
/ �ELECT again to select >Ringer volume.
4. Press q CID
or p DIR
to sample each volume level.
5. Press
MENU /�ELECT t o save your preference. There is a
confirmation tone and the screen returns to the previous menu.
NOTES:
The handset ringer volume also determines the ringer vol ume for
intercom calls.
If the ringer volume is set to off, that handset is silenced for all incoming calls.
If the ringer volume is set to off, caller ID will not be announced and
Caller ID won’t be
announced displays briefly on the screen.
Ringer tone
You can choose one of ten ringer tones.
1. Press MENU/
�ELECT
in idle mode to enter the main menu.
2. Use q
CID
or p
DIR
to scroll to >Ringers, then press
MENU
/�ELECT.
3. Press q CID
or p DIR
to scroll to >Ringer tone, then press
MENU
/�ELECT.
4. Press q
CID
or p
DIR
to sample each ringer tone.
5. Press
MENU
/�ELECT to save your preference. There is
a confirmation tone and the screen returns to the
previous menu.
NOTE: If you turn off the ringer volume, you will not hear ringer tone samples.
•
•
•
> Ringer tone
Ringer volume
p
q
RINGER TONE
> Tone 1
p
q
> Ringer volume
Ringer tone
p
q
>Ringers
Intercom
p
q
RINGER VOLUME
p
q