Asus M2N-MX SE - Manual (Page 64)

2-22 Chapter 2: BIOS setup
CAS Latency (CL) [Auto]
Sets the CAS latency timing.
Configuration options: [Auto] [3.0] [4.0] [5.0] [6.0]
TRCD [Auto]
Sets the RAS-to-CAS delay timing.
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRP [Auto]
Sets the row-precharge delay timing.
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRAS [Auto]
Sets the row-active delay timing.
Configuration options: [Auto] [5 CLK] [6 CLK] ~ [18 CLK]
Command Timing (2T mode) [Auto]
Sets the command timing. (per clock unit)
Configuration options: [Auto] [1T] [2T]
MCT Timing Mode [Auto]
Configuration options: [Auto] [Manual]
Bank Interleaving [Disabled]
Enable or disable the Bank Memory Interleaving.
Configuration options: [Disabled] [Auto]
Enable Clock to All DIMMs [Disabled]
Enable or disable the Unused Clocks to DIMMs Even Memory Slots are
not populated.
Configuration options: [Disabled] [Enabled]
MemCLK Tristate C3/ATLVID [Disabled]
Enable or disable the MemCLK Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Enable or disable the Memory Remapping Around Memory Hole.
Configuration options: [Disabled] [Enabled]