Asus M2N-MX SE - Manual (Page 63)

ASUS M2N-MX SE 2-21
Memory Configuration
Memory Setting: 333MHz-5.0-5-5-15-2T
Memclock Mode [Auto]
CAS Latency (CL) [Auto]
TRCD [Auto]
TRP [Auto]
TRAS [Auto]
Command Timing (2T mode) [Auto]
MCT Timing Mode [Auto]
Bank Interleaving [Disabled]
Enable Clock to ALL DIMMs [Disabled]
MemCLK Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
Memory Controller
2.4.2 Chipset
The Chipset menu allows you to change the advanced chipset settings.
Select an item then press to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause the system to malfunction.
Memory Controller
Southbridge Configuration
Hyper Transport Configuration
Memory Controller
Memory Configuration
ECC Configuration
Power Down Control [Auto]
Memory Configuration
Memclock Mode [Auto]
Select the DRAM Frequency programming method. If Auto, the DRAM
speed will be based on SPDs. If Limit, the DRAM speed will not exceed
the specified value. If Manual, the DRAM specified will be programmed
regardless.
Configuration options: [Auto] [Limit] [Manual]