AT&T Trimline 260 - Manual (Page 9)

6
INSTALLATION
Modular
telephone wall
jack
2 Plug one end of the line cord into
the telephone line jack.
3 Feed the line cord through
the channel as shown (so
the phone will sit flat).
4 Connect the other end
to a telephone jack not
controlled by a wall
switch, then continue
with the steps in
“For Table/Desk and
Wall Installation”
on page 7.
Line cord
Channel
Telephone
line jack
260book_1ATT 4/24 4/24/02 6:24 PM Page 6