AT&T Trimline 260 - Manual (Page 24)

21
CALLER ID OPERATION
Reviewing Call
History
The screen displays call
information for about
30 seconds after it has
been received.
1 Press - to review
the most recent call.
— OR —
Press
+ to review
the oldest call.
2 Press + or - to
scroll through call
history. When you
reach the end of
call history, the
screen displays
END OF LIST
,
then begins again.
Display Dial
Dial a displayed
phone number while
reviewing calls in
call history.
1 Lift the handset.
2 Press and release
D. The
screen displays the
number being
called. If the
screen displays
ERR
, the present
number cannot be
dialed.
You cannot use this
feature to dial
PRIVATE
or
UNKNOWN calls.
Display Dial Options
You can check or change
the way a number in call history is dialed.
1 Press + or - until the screen displays the number you want to call.
2 Press
D to make the call
— OR —
Press N to scroll through choices for dialing the number (without a “1,”
or with a “1” followed by the area code).
Call History
This product assigns
each incoming call a
number from 1 to 99.
The most recent call
will have the highest
number. When the
memory is full, the
oldest call information
is deleted to make room
for new incoming call
information.
260book_1ATT 4/24 4/24/02 6:24 PM Page 21