Brother QL-710W - Manual (Page 19)

18
The printed bar code cannot be
read.
• Set the label vertical to the print head as shown below.
• Some types of scanner are not able to read the bar code. Try
using another scanner.
• We recommend printing the Bar code with Print Quality options
set to "Give priority to print quality".
Windows
®
XP:
To change the Print Quality options, open the printer properties
by going to [Control Panel] - [Printers and Other Hardware] -
[Printers and Faxes], right-clicking the printer whose settings are
to be changed, then selecting [Properties]. Then, in the [General]
tab, click [Printing Preferences...].
Windows Vista
®
:
To change the Print Quality options, open the printer properties
by going to [Control Panel] - [Hardware and Sound] - [Printers],
right-clicking the printer whose settings are to be changed, then
selecting [Properties]. Then, in the [General] tab, click [Printing
Preferences...].
Windows ® 7:
To change the Print Quality options, open the printer properties
by going to - [Devices and Printers], right-clicking the printer
whose settings are to be changed, and selecting [Printer
properties]. Then, in the [General] tab, click [Preferences...].
Mac OS X 10.5.8 - 10.7:
To change the Print Quality options, use the [Basic] tab in the
printer properties.
I want to reset the printer/delete
the data transferred from the
PC/Mac.
Press and hold the Cut button while holding down the ON/OFF
button when the machine is turned off. When the Wi-Fi lamp
starts flashing and the Status lamp lights orange, press the Cut
button six times while continuing to hold down the ON/OFF
button. The machine will then reset. All data transferred from the
PC/Mac will be deleted and the machine will be reset to factory
settings.
I want to cancel the current
printing job.
• Make sure that the printer is ON, and press ON/OFF button.
Problem Solution
Print head
Recommended
print direction
Label exit slot