Asus Motherboard A7S8X-MX - Manual (Page 22)

1 - 1 0 1 - 1 0 1 - 1 0 1 - 1 0 1 - 1 0 C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n
1.7 System memory
1.7.1 1.7.1 1.7.1 1.7.1 1.7.1 Overview Overview Overview Overview Overview
The motherboard comes with two Double Data Rate (DDR) Dual Inline
Memory Module (DIMM) sockets. These sockets support up to 2 GB system
memory using 184-pin PC2700/PC2100 unbuffered DDR DIMMs and allow
up to 2.7 GB/s data transfer rate.
The following figure illustrates the location of the DDR DIMM sockets.
1.7.2 1.7.2 1.7.2 1.7.2 1.7.2 Memory Configurations Memory Configurations Memory Configurations Memory Configurations Memory Configurations
You may install 64 MB, 128 MB, 256 MB, 512 MB and 1 GB unbuffered
non-ECC DDR DIMMs into the DIMM sockets using the memory
configurations in this section.
• Installing DDR DIMMs other than the recommended configurations
may cause memory sizing error or system boot failure. Use any of
the recommended configurations in the table on the next page.
• Always install DIMMs with the same CAS latency. For optimum
compatibility, we recommend that you obtain memory modules from
the same vendor.
A7S8X-MX
®
A7S8X-MX 184-pin DDR DIMM sockets
80 Pins
104 Pins
DIMM1 DIMM2