Airlink101 AR550W3G User Manual

Page 43

Parameters

Description

WPS

Select Enable or Disable WPS function.

AP PIN

This is the WPS PIN code of this wireless router. This code is
useful when you need to build wireless connection by WPS
with other WPS-enabled wireless devices using PIN.

Config Mode

There are “Registrar” and “Enrollee” modes for the WPS
connection. When “Registrar” is enabled, the wireless clients
will follow the router’s wireless settings for WPS connection.
When “Enrollee” mode is enabled, the router will follow the
wireless settings of wireless client for WPS connection.

Config Status

If the wireless security (encryption) function of this wireless
router is properly set, you’ll see “Configured” message here. If
wireless security function has not been set, you’ll see
“unConfigured”.

Config Method

Select between Push Button and PIN Code.
Push Button: Select Push Button and click ‘Trigger’ to start
Push-Button setup procedure. The router will wait for WPS
requests from wireless clients for 2 minutes. The “WLAN” LED
on the wireless router will be blinking quickly when this wireless
router is waiting for incoming WPS request. You need to press
the WPS button on the wireless client during this time.