Alpine CDA-7876RB - Manual (Page 38)

36
-EN
REMOTE CONTROL
(CDA-7876RB/TDA-7588RB/TDA-7587R only)
Battery Type "AAA" sized dry battery
Battery Quantity 2
Dimensions (W
×
H
×
D) 42 mm (1-21/32")
×
121 mm (4-3/4")
×
23 mm (15/16")
Weight (without battery) 50 g (1.8 oz)
GENERAL
Power Requirement 14.4 V DC
(11–16 V allowable)
Maximum Power Output 60 W
×
4
Maximum Subwoofer Output
Voltage 4 V/10 k ohms
Maximum Pre-Output Voltage 2 V/10k ohms
(CDA-7873R/TDA-7587R only)
5 V/10k ohms
(CDA-7876RB/TDA-7588RB only)
Bass ±14 dB at 60 Hz
Treble ±14 dB at 10 kHz
Weight 1.5 kg (3 lbs. 5 oz)
CHASSIS SIZE
Width 178 mm (7")
Height 50 mm (2")
Depth 155 mm (6-1/8")
NOSEPIECE SIZE
Width 170 mm (6–11/16")
Height 46 mm (1-13/16")
Depth 24 mm (15/16")
Due to continuous product improvement, specifications and
design are subject to change without notice.
Specifications
FM TUNER SECTION
Tuning Range 87.5 – 108.0 MHz
Mono Usable Sensitivity 0.7 µV
Alternate Channel Selectivity 90 dB
Signal-to-Noise Ratio
65 dB
Stereo Separation 35 dB
MW TUNER SECTION
Tuning Range 531 – 1,602 kHz
Sensitivity (IEC Standard) 25.1 µV/28 dB
LW TUNER SECTION
Tuning Range 153 – 281 kHz
Sensitivity (IEC Standard) 31.6 µV/30 dB
CD SECTION
(CDA-7876RB/CDA-7873R only)
Frequency Response 5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion 0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)
TAPE PLAYER SECTION
(TDA-7588RB/TDA-7587R only)
Tape Speed 1-7/8 ips (4.8 cm/sec) ±0.7%
Wow & Flutter 0.06% WRMS
Signal-to-Noise Ratio
With Dolby B-TYPE NR
68 dB
Without Dolby NR 60 dB
Frequency Response
With Alpine Test Tape
30–20,000 Hz