Alpine TMI-M990 - Manual (Page 47)

43
- EN
AUX IN/S-IN SETUP
The following steps 1 to 6 are for the standard AUX IN/S-IN setup. For details on the setup item
details, see each setting item.
< AUX IN/S-IN setup standard operation >
1
Press and hold OPEN/CLOSE / SETUP for at least 2
seconds.
The GENERAL SETUP screen is displayed.
2
Press OPEN/CLOSE / SETUP or VISUAL EQ, and
select the preferred item setting from AUX IN 1, 2, 3
SIG. or S-IN SIG.
When you press OPEN/CLOSE / SETUP, you move
to the next item, press VISUAL EQ to move to the
previous item.
3
Press / TILT or / TILT.
The AUX IN 1, 2, 3 or S-IN SETUP screen is dis-
played.
○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○