Apple Power Mac G4 (Battery Replacement) User Manual
Page 4
Power Mac G4 (Mirrored Drive Doors) Battery -
4
2.
If a full-length video card extends over the battery, remove the video card as follows.
• Using a Phillips screwdriver, remove the video card mounting screw.
(Figure 3)
Figure 3
• Gently hold back the clip on the video card connector to release the card.
• Pull the card straight up, and remove it from the computer.
(Figure 4)
Figure 4
See also other documents in the category Apple Hardware:
- ATA Controller Board (8 pages)
- Optical Drive Bracket (6 pages)
- Logic Board (20 pages)
- Ethernet CS II Card (25 pages)
- Power Mac G4 / Macintosh Server G4 CD/DVD Drive (8 pages)
- Mac Pro (PCIe/Graphics Card Replacement) (6 pages)
- AirPort Networks (72 pages)
- Network Setup (184 pages)
- iPod USB Power Adapter (20 pages)
- Power Mac G4 / Macintosh Server G4 (SCSI Card Replacement) (4 pages)
- Power Mac G4 Cube (Battery Replacement) (6 pages)
- MagSafe Airline Adapter (16 pages)
- SCSI Card (4 pages)
- QuickTime Streaming Server (Administrator’s Guide) (86 pages)
- Power Mac G4 / Macintosh Server G4 (Video Card Replacement) (6 pages)
- SDRAM DIMM (7 pages)
- Grr (10 pages)
- SCSI Hard Drive (6 pages)
- CD/DVD Drive Mac G4 (8 pages)
- Mac Pro Bluetooth Cable (5 pages)
- Mac G4 (Optical Drive Replacement) (10 pages)
- ATI RADEON CABLE HD 4870 (7 pages)
- AP-64e EPROM WRITER (6 pages)
- ATA Drive Cable Mac G4 (4 pages)
- Mac Pro (PCIe Fan Replacement) (4 pages)
- ATA Hard Drive Mac G4 (10 pages)
- FireWire Cable (5 pages)
- Power Mac G5 (AGP/PCI Card Replacement) (7 pages)
- Dual-Slot Riser Card (5 pages)
- PowerBook G3 Series (Backup Battery) (3 pages)
- Power Mac G4 (Speaker Grill Replacement) (4 pages)
- Mac Pro RAID Card and Battery (6 pages)
- Optical Drive Cable (5 pages)