Avocent LongView Wireless Installer - Manual (Page 16)

10 LongView Wireless Installer/User Guide
Power
Supply
Transmitter
Cables
Audio Cable
Peripheral Cables
Installing a LongView Wireless Extender
Follow the step-by-step procedures listed in the To install a LongView
Wireless transmitter and To install a LongView Wireless receiver sections to
properly install your new KVM extension system.
WARNING: To reduce the risk of electric shock or damage to your equipment -
- Disconnect the power from the unit by unplugging the power supply from the electrical outlet.
To install a LongView Wireless transmitter:
1. Ensure that the video setting of your computer is 1024 x 768, 800 x 600
or 640 x 480 at 60 Hz refresh rate. Best performance will be achieved if
the color resolution is set to 24 bit color or higher.
2. Power down the computer that will be part of your LongView
Wireless Extender.
3. Unplug the peripherals (keyboard, mouse, monitor and speakers with
built-in amplifi ers, if applicable) from your computer.
Figure 2.1: LongView Wireless Transmitter Installation Example