The cr10 remote control remote control, English, Amplifier commands – Arcam FMJ A18 User Manual

Page 9: Inserting batteries into the remote control

e-9

english

The CR10 is pre-programmed for use with the A18 as

well as Arcam CD players (such as CD17).
The CR10 requires a clear line of sight to the front panel

display of A18 to ensure reliable operation. Make sure

you have inserted the two AAA batteries supplied before

attempting to use the CR10.
Keys on the CR10 that control the A18 are shown not

greyed-out.

amplifier commands

Toggles the mute function to silence speaker

output. Mute is displayed on screen when

active.

VoL –
VoL +

Decrease (

VoL–

) and increase (

VoL+

)

amplifer volume

Source

keys

Selects the amplifier input:

dVd

DVD input

sAt

Satellite decoder input

AV (television sound) input

tun

DAB/FM/AM tuner input

AuX

Auxiliary line input

pVr

Personal Video Recorder input

CD input

pho

Phono input

bAss

Adjust bass levels (using

VoL–

and

VoL+

controls) between -7, through 0, to +7

treb

Adjust treble levels (using

VoL–

and

VoL+

controls) between -7, through 0, to +7

bAL

Adjust balance levels (using

VoL–

and

VoL+

controls) between L (left) 9, through 0, to

R (right) 9

proc

Toggles between PROC ON and OFF.

PROC mode is only available if the

input

is selected
When in PROC mode, the

VoL -

and

VoL +

can be used to adjust the PROC volume

setting.

drct

Toggles direct mode (i.e. tone defeat)

dIsp

Cycles through display panel brightness

options (bright, off, dim)

Mode

Cycles through displaying the settings for

Bass, Treble and Balance

�

��

�

��

inserting batteries into the

remote control

1. Squeeze the tab and lift off the remote control’s

battery compartment cover.

2. Insert the two ‘AAA’ batteries supplied in the

proper direction, following the ‘+’ and ‘–’ marks

in the battery compartment.

3. Replace the battery compartment cover, locking

the tab with a click.

the cr10 remote control

remote

control