Arcam FMJ A18 - Manual (Page 12)

e-12
Continuous power output (20Hz—20kHz at 0.5% THD), per channel
Both channels, 8
Ω , 20Hz—20kHz 50W
Single channel, 4 Ω , at 1kHz 70W
Harmonic distortion, 80% power, 8 Ω at 1kHz 0.01%
Inputs
Phono cartridge:
Input sensitivity at 1kHz
2.5—15mV
Input impedance 47k Ω
Signal/noise ratio (CCIR, 45W) 88dB
Overload margin 31dB
Line and AV inputs:
Nominal sensitivity
250mV—1.5V
Input impedance 22k Ω
Signal/noise ratio (CCIR, 45W) 98dB
Preamplifier output
Nominal output level
630mV
Output impedance <50 Ω
Headphone output
Maximum output level into 600
Ω 7V
Output impedance 100 Ω
General
Mains voltage
110—120V or 220—240V
Power consumption (maximum) 350W
Dimensions W x D x H (including feet) 432 x 275 x 85mm
Weight (net) 7.2kg
Weight (packed) 9.1kg
Supplied accessories mains lead
CR10 remote control
2 x AAA batteries
E&OE
NOTe: All specification values are typical unless otherwise stated.
continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications are
subject to change without notice.
specifications