A18 connections – Arcam FMJ A18 User Manual

Page 6

e-6

A18

connections

note

Please read the ‘Placing the unit’, ‘Power’ and

‘Interconnect cables’ sections on page 5 before

connecting up your A18 integrated amplifier!

��

�

��

�

��

audio connections

The labels above the connectors give suggested

audio inputs, although any suitable device may be

connected to the line-level inputs. (Note, however,

that the name of the input shown on the front-panel

display cannot be changed.)

dVd

sAt

tuner

and

are all line-level inputs. The

phono (MM)

input has different characteristics – see

page 12 for the specification.

In addition to the line level inputs, the

and

pVr

connectors both have line level outputs for use in

recording from other sources.
See page 7 for more information.

Pre-amplifier connection

This socket is only used if you are using

the A18 as a pre-amp, for example, when

using the A18 in conjunction with a P38

in a bi-amplified system.

See page 8 for more information.

Speaker terminals

See page 8 for information on

connecting loudspeakers.

Power inlet

Connect the correct

mains cable here.

Voltage select

Ensure that the voltage selected

matches your local power supply.

Phono earth terminal

For connecting your turntable

earth lead, if required. Note that

this terminal must not be used as a

safety earth.

��

aux input

Analogue 3.5mm stereo jack socket,

intended for connecting a portable

MP3 player.

Phones

3.5mm stereo jack socket,

intended for use with a set of

headphones.