UEi Test Instruments DT304 - Manual (Page 5)

LCD Display Functional Description
1. Primary Display: T1/T2 or T3/T4
2. TYPE KJET: Type of thermocouple.
3. SETUP: Setup is in progress.
4. RECALL: The logged readings are displayed.
5. OFFSET: The thermocouple measurement includes an offset.
6. HOLD: The display readings do not change.
7. LOW BATTERY: Replace batteries.
8. USB: The thermometer is connected to a PC via USB
interface port.
9. LOG: Readings are being logged.
10. ˚C,˚F, K: Temperature units.
11. Secondary Display: Internal temperature of the thermometer,
MEMORY, MIN, MAX, AVG, and T1-T2 or T3-T4.
reading. Shows the memory location initially when a logged
reading is recalled.
12. Time Display: 24-hour clock, shows the INTERVAL length in
SETUP. Shows elapsed time when AVG is on or before clock has
been set. Shows the memory time later on when a logged
reading is recalled.
3
1
2 3 4 5 6 7
8
9
10
11
12
13