Accton Technology 12se - Manual (Page 16)

Fast EtherHub Installation Manual
14
Other Important Tips
➀ Make sure no more than 100 meters of cable are used between the
hub and the desktop.
➁ Verify that the cabling type used is correct. (Category 5 UTP cable)
➂ Make sure the network adapter cards installed in the workstations
and cable connections are in good working condition.
➃ Hubs connected via the backplane ports cannot be cascaded via the
uplink port. When cascading hubs, limit the cascade to two hubs, and
limit the interhub cabling to 5 meters. In a two-repeater topology, the
maximum network diameter between end nodes is 205 meters.