Asus CUV4X-CME - Manual (Page 8)

8 ASUS CUV4X-CME User’s Manual
HARDWARE SETUP
Connectors
H/W SETUP
3) ATX Power Supply Connector (20-pin block ATXPWR)
This connector connects to an ATX power supply. The plug from the power supply
fits in only one orientation because of the different hole sizes. Find the proper
orientation and push down firmly making sure that the pins are aligned.
2) Floppy Disk Drive Connector (34-1 pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connecting
the single end to the board, connect the two plugs on the other end to the floppy
drives.
NOTE: Orient the red markings on
the floppy ribbon cable to
PIN 1
CUV4X-CME Floppy Disk Drive Connector
PIN 1
CUV4X-CME
CUV4X-CME ATX Power Connector
+3.3 V
olts
-12.0 V
olts
Ground Power Supply On Ground Ground Ground -5.0 V
olts
+5.0 V
olts
+5.0 V
olts
Power Good
+12.0 V
olts
+3.3 V
olts
+3.3 V
olts
Ground
+5.0 V
olts
Ground
+5.0 V
olts
Ground
+5V Standby
CUV4X-CME