Asus CUV4X-CME - Manual (Page 11)

ASUS CUV4X-CME User’s Manual 11
HARDWARE SETUP
Connectors
H/W SETUP
8) System Power LED Connector(2-pin PWRLED)
This 3-1 pin connector connects to the system power LED. The LED lights up
when you turn on the system power, and blinks when the system is in sleep or
soft-off mode.
9) Hard Disk LED Connector (2-pin HDLED)
This 2-pin connector is for the hard disk LED. This LED blinks during hard disk
operation.
10) ATX Power Switch Connector (2-pin PWR)
The system power is controlled by a momentary switch attached to this connector.
11) Reset Switch Connector (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting
the system without turning off the power switch. This is a preferred method
The following PANEL illustration is for items 8-11.
CUV4X-CME System Panel Connectors
* Requires an ATX power supply.
CUV4X-CME
Reset
Ground
Ground
PWR
-PLED
+HDLED
-HDLED
+PLED
Power LED
HD LED Reset SW
ATX Power Switch*