Sterlco BP 1000 Series Beside the Press Granulators - Manual (Page 23)

1000 Series Granulators Chapter 4: Operation 23 of 45
4-4 Shut-down
Use the following procedure to properly and safely shut down the machine:
1. Stop all feeding of material.
2. Allow the granulator to run until the cutting chamber is completely empty.
3. Press the drive motor “stop” button. This shuts off the rotor drive motor.
4. After the granulator has stopped, press the airveyor stop button (if applicable) located
at the blower motor.
5. Turn the main power switch to off.