Sterlco S Series Central Chilling Stations User Manual
Page 51
SSC Series Central Chilling Stations
Page 51 of 86
Operating Chiller Pumps
To turn on and off the pumps, start from the Main Menu, then:
Press the
or
buttons to highlight either
“CONFIGURATION MENU”.
Press
↵
Highlight “PUMP ENABLES”
Press
↵
Highlight the pump you want to operate.
The Pump Enables Screen appears
Pump Enables Screen
Any pump that is disabled to the OFF-LINE position will not be
called to operate. Simply toggle the F1 key on the enable/disable
screen to toggle the state of the pump from the ON-LINE to OFF-
LINE state.
Setting Pump Lead/Lag Times and Activating Pump Lead/Lag
Operation
While in the Configuration Menu, the pump lead/lag screen allows
the customer to enable or disable the Lead/Lag rotation of
compressors. While viewing the screen for the applicable rotation,
pressing F1 will toggle the rotation function On or Off. Pressing
the F2 button will present an entry screen which will allow the
entry of a rotation interval. Acceptable range is 50-200 hours.